	COMMERCIAL TUBE PRODUCT SELECTOR

sorbent tube for perkinelmer

PerkinElmer (1/4 x 3.5”) Stainless Steel Tubes

Coated PerkinElmer (1/4 x 3.5”) Stainless Steel Tubes

PerkinElmer (1/4 x 3.5”) Glass Tubes (“without frit” at this time) With Three Bands (Tenax TA) Glass Tubes

PerkinElmer (1/4 x 3.5”) Glass Tubes (“without frit” at this time) With Two Bands (Air Toxic)

PerkinElmer (1/4 x 3.5”) Glass Tubes (“without frit” at this time) With One Band (Carbopack B)

PerkinElmer (1/4 x 3.5”) Glass Tubes (“without frit” at this time) With No Band and Four Bands (custom)

Tube Identification

PerkinElmer/DANI/Markes/Shimadzu Stainless Steel Tubes (coated or uncoated)

PerkinElmer/DANI/Markes/Shimadzu Glass

General Stainless Steel Tubes

Sorbent Tubes for PerkinElmer, DANI and Markes Instruments

PerkinElmer,DANI and Markes instruments use sorbent tubes that are generally considered the “industry standard.” Camsco’s® expansive in-house manufacturing and glass blowing capabilities provide flexibility for clients, including the ability to fuse glass frits, centerless grinding, lapping, annealing and polishing – all with the experience that comes with having manufactured almost two million thermal desorption tubes since 1991. Camsco makes stainless steel and glass tubes in several configurations for all of the PerkinElmer, DANI and Markes instruments.

Standard Features

Camsco uses only the best raw materials. Our borosilicate-33 glass tube stock is Schott-Duran and we never use Simax tubing. The steel used to manufacture these tubes is the highest grade 316L stainless. Both glass and steel have unique serial numbers and flow direction arrows are included on fritless glass tubes. The glass tubes have fused glass frits.

To ensure sample and testing accuracy, we inert coat all internal metal parts as part of our standard manufacturing process. The inert coated wire mesh and G-clips are less likely to introduce active sites and interfere with your analysis.

COGNI™ System

Barcode, serial number, and circumferential band(s) come standard as part of the COGNI (Camsco’s One Glance and Numeric Identification) System. The identification marks are permanently embedded on the tubes offering an inherent advantage over other identification methods.

Three bands for Tenax TA tubes
Two bands for Air Toxic tubes
One band for Carbopack™ B tubes
No band for other tubes
Four bands available for customer specified requirements

Custom Features – Stainless Steel

Custom options include inert coatings and conditioned tubes can be shipped with compression fittings. Cap options include compression caps (brass, steel and PTFE) and analytical caps (brass and PTFE) for conditioned tubes.

Custom Features – Borosilicate Glass

Options include fused glass frits, without glass frits and quartz wool. Tube manufacturing includes centerless grinding, ground ends, chamfers, lapping, annealing, polishing and fire-polishing.

Capping Options

Compression caps, analytical caps and passive sampling caps are available. Please refer to the Capping Options insert sheet for more information.

If compression caps are ordered with conditioned tubes, Camsco guarantees that each cap is torqued to optimal tightness.

Protective micro caps are provided when no cap option is specified.

Camsco Commercial Desorption Tube Product Lines & Options

	•	Sorbent Tubes for CDS Dynatherm Instruments
	•	Sorbent Tubes for Gerstel Desorption Units
	•	Sorbent Tubes for PerkinElmer, DANI and Markes Instruments
	•	Sorbent Tubes for Tekmar-Dohrmann Thermal Desorption Units

Specifications and Part Numbers


	Steel ATD Sample Tubes	Part Number*
	Tenax™ TA 60/80 mesh	SC60520-60-B
	Air Toxics	SC60501-B
	Carbopack™ B 60/80 mesh	SC60541-B
	Chromosorb® 106 60/80 mesh	SC60503-B
	Tenax™ GR 60/80 mesh	SC60520-GR-B
	Carbopack™ B/Carbosieve™ SIII	SC60528-B
	Carboxen™ 569 20/45 mesh	SC60530-B
	Carbosieve™ SIII 60/80 mesh	SC60510-B
	Glass ATD Sample Tubes	Part Number*
	Tenax™ TA 60/80 mesh	GC60520-60-B
	Air Toxics	GC60501-B
	Carbopack™ B 60/80 mesh	GC60541-B
	Chromosorb® 106 60/80 mesh	GC60503-B
	Tenax™ GR 60/80 mesh	GC60520-GR-B
	Carbopack™ B/Carbosieve™ SIII	GC60528-B
	Carboxen™ 569 20/45 mesh	GC60530-B
	Carbosieve™ SIII 60/80 mesh	GC60510-B

Steel Sorbent Tube

Glass Sorbent Tube (with Frit)

Glass Sorbent Tube (without Frit)

Identification Options


	Type of ID	Available On	Details
One-Glance ID	Laser Bands	Stainless Steel Tubes	For PE tubes only: 3 bands indicate a Tenax TA tube; 2 bands indicate an Air Toxics tube; 1 band indicates a Carbotrap B tube; all other tubes have no band, 4 bands available for custom definition.
	Colored Bands	Glass Tubes	For environmental tubes, blue bands only: 3 bands indicate a Tenax TA tube; 2 bands indicate an Air Toxics tube; 1 band indicates a Carbotrap B tube; all other tubes have no band, 4 bands available for custom definition. For military tubes: Any number of bands in any combination of Black, Red, Blue, Green and Yellow, defined by customer.
	Colored Spacers	PTFE (Teflon) Tubes	Spacers can be arranged in any combination of Black, Red, Blue, Green and Yellow, defined by customer.
Numeric ID	Barcode S/N	All Tubes	Permanently Laser marked on Stainless steel tubes. Permanently fired/enbeded on the surface of centerless grinded glass tubes. High/low temperature stickers on all other tubes.
Numeric ID	Numeric S/N	All Tubes

DOWNLOAD SPEC SHEET PDF

Top